FläktGroup® SEMCOTM offers a wide range of active and passive chilled beams which combine radiant cooling with conventional overhead ventilation to reduce energy use while improving indoor air quality and comfort with a low velocity, draft-free solution. This lower airflow allows for a smaller air handling unit. Additionally, chilled beams provide lower noise levels than most HVAC systems and reduce the architectural impact of ductwork and other mechanical systems.
A chilled beam system is designed for use in non-residential applications where there is a high temperature load or rooms that require individual comfort control. FläktGroup SEMCO’s chilled beams are designed to manage high cooling capacity by using a primary air supply, typically outdoor air, to increase airflow over the element. The primary air is then supplied to the room through diffusers built into the beam. Many of our beams have a patented system for adjusting airflow, cooling effect, and airflow pattern making them highly adaptable to suit the changing conditions of any given space.
Our chilled beams are assisted by the FläktGroup SEMCO Neuton® Chilled Beam Pump Module which provides active condensation control while offering an improved response to occupied and unoccupied spaces. Learn more about each of these products by selecting the images below.
Sign up to attend an AIA certified webinar on chilled beams and earn a CEU credit.
Find the instructions for the chilled beam selection tool here.
© 2020 FläktGroup SEMCO. All rights reserved. SEMCO® is a registered trademark of SEMCO, LLC and SEMCO Duct and Acoustical Products, Inc. SEMCO, LLC and SEMCO Duct & Acoustical Products, Inc. are part of FläktGroup and are sometimes referred to collectively as FläktGroup SEMCO © 2020 FläktGroup SEMCO. All rights reserved. SEMCO® is a registered trademark of SEMCO, LLC and SEMCO Duct and Acoustical Products, Inc. SEMCO, LLC and SEMCO Duct & Acoustical Products, Inc. are part of FläktGroup and are sometimes referred to collectively as FläktGroup SEMCO